Sunrocket Unlocking 5 EASY STEPS

Unlock SunRocket’s Gizmo in 5 easy steps…

Published by kishore July 19th, 2007 in SunRocket, VOIP, Cheap VOIP, ViaTalk and Gizmo Unlock.

Every Penny Counts… Since SunRocket has closed its operations and no more going to serve its customers, you should unlock the Gizmo and use it with other provider like JoiPhone ViaTalk, Packet8 etc and save money on equipment and time.

Unlocking the SunRocket is easy and can be achieved in simple 5 steps.

Follow instructions listed here to unlock your gizzmo to use on other VOIP providers (might not work for all Sunrocket adaptors):

1) Disconnect to WAN i.e. Unplug cable from Gizmo WAN port (i.e. no Internet)

2) With the PC connected to Gizmo LAN port, Go to http://192.168.251.1 and Login to it using user Id

First try User Id: Admin & Password: 7UprUtew

If this is not working then try User ID: user & password: welcome

3) Now Cut and Paste the following url and press enter to Restore factory default
http://192.168.251.1/restore2.ssi

After about 15 seconds you should see a message about reset to defaults. Wait another 30-45 seconds.
Now close browser window. At this point your Gizmo should be in the same state as when SunRocket first shipped it to you.

4) Open a new browser window, go to

http://192.168.251.1/Voice_adminPage.htm (Do not open Gizmo home page first).

When prompted for user and password, Enter

User Id: admin & Password: slapshot (Valid for V3.0.77, V3.0.75)

5) Now Disable Provisioning, Go to
Menu –> IP Network —> Provisioning Setting and Uncheck Enable Provisioning
Click Save & Reboot. Click OK to warning.

At this point of time, your Gizmo should be unlocked and ready to be used with any service.

Let me know in case you find any problem or do you have any other suggestion.

Related: SunRocket Brust ! Explore other options now…

Update 7/20/2007: JoiPhone is offering their service with Gizmo now, you can unlock Gizmo and can activate your phone service the same day!

---